Boulden Company - Boulden International



Sales Offices:

Headquarters
East Coast U.S.

Boulden Company
1013 Conshohocken Road
Suite 308
Conshohocken, PA 19428
Tel: 610.825.1515
Toll-free: 800.523.0569
Fax: 610.825.5544
sales@bouldencompany.com

Gulf Coast U.S.
Boulden Company, Inc.
1525 Lakeville Dr., Ste. 235
Kingwood,TX 77339
Tel: 281-348-0888
Fax: 281-749-8116
ken@bouldencompany.com

Canada
Boulden Company Inc.
Brantford, Ontario
Tel: 519.759.0889
Fax: 519.759.5546
sales@bouldencompany.com


Europe Sales Office
and Warehouse
Boulden International LLC
Succursale Luxembourg
9 route des Trois Cantons
L-8399 Windhof
Luxembourg
Tel: +352 26 39 33 99
Fax: +352 24 61 16 62
GSM: +352 621 29 43 21
robert@bouldencompany.com


News:
Boulden Company now carries Dupont™ Krytox® oils & greases lubricant .

Boulden Company launches distribution division for rotating equipment application support for Dupont™ Vespel® CR-6100.



DuPont Vespel® CR-6100

How important is it to protect your pump from run dry events, wear ring seizure, and the damage that results from these events? How much money could you save by improving centrifugal pump efficiency? Are you tired of poor mechanical seal reliability from pumps that were built more than 20 years ago? Boulden Company can help address these issues with the next generation composite wear ring material: DuPont™ Vespel® CR-6100.

Dupont Vespel CR-6100

Boulden Company carries a large inventory of DuPont™ Vespel® CR-6100 for the rotating equipment market. Customers in the refining, power, pipeline, chemical, cryogenic, steel, aluminum, and other fluid handling markets have all benefited from using Vespel® CR-6100 in their pumps. Listed below are some of the reasons why so many process plants in these industries have selected Vespel® CR-6100 for their pump wear rings, line shaft bearings, and throat bushings:

• Protection from pump run dry events

• Increased centrifugal pump efficiency*

• Increased rotor stability and reduced pump vibration*

• Increased mechanical seal reliability*

• Ease of machining and installation

• Temperature capabilities from cryogenic to 550 F

• Broad chemical compatibility

• Immediate material availability through Boulden Company

• Technical support from knowledgeable machinery personnel

Dupont Vespel CR-6100 wear rings

*Were you aware that the clearance at pump components such as wear rings, line shaft bearings, and throat bushings has a big impact on pump reliability?  The unique properties of Vespel® CR 6100 allow these components to be installed with reduced clearance compared to API standard recommendations.  When clearance is reduced using Vespel® CR 6100, efficiency and rotor stability improve, resulting in energy savings, along with lower vibration and longer seal life.

To learn more, contact the Boulden representative near you.

For customers from the East Coast, Midwest, or Carribbean contact Brian Boulden in our Philadelphia office.  For inquiries in the Gulf Coast, contact Ken Holmes in our Houston office.  For inquiries in Eastern Canada, contact Paul Brown in our Branford, Ontario office. For inquires in Europe, Africa and GCC countries, contact Robert Aronen in our Europe office

Also be sure to check out the DuPont™ Vespel® CR-6100 pump website.
DuPont™ Vespel® CR-6100 is a registered trademark of DuPont and its affiliates.


Serving all Fluid Process Industries that rely on pumps to keep their operation running, such as:
Water
Chemical
Power
Steel
Pipelines
Aluminum
Refining
Cryogenic