Vespel® CR-6100 Material Information

 

Dupont Vespel machined pump components

Dupont Vespel® CR-6100 Machined Pump Components

 Parts machined from Dupont Vespel

Centrifugal Pump Components Machined From Dupont Vespel® CR-6100

If you prefer to purchase finished components, Boulden can supply finished or semi-finished parts in a matter of days. We also have a large inventory of composite materials, in-stock and ready to ship today.

Boulden has dedicated CNC machines to manufacture Vespel® CR-6100 parts. We can make a wide range of component shapes and geometries:

  • Solid Vespel® CR-6100 parts
  • Split components
  • Vespel® CR-6100 inserted into metal holders
  • Shaft bearings with spiral grooves
  • Shaft bearings with axial grooves
  • PERF Seal™ Components for even greater performance

Dupont™ Vespel® CR-6100 Machined Parts & Machining Specs

At Boulden, our dedicated CNC machines can quickly and effectively produce finished or semi-finished machined parts with short turnaround times. Whatever your component geometry, we can work with you to design and manufacture a Vespel® CR-6100 part to suit your application needs. The specifications for machiningVespel include the following parameters:

  • Use carbide-tipped tools with a 5° to 15° rake angle at the front face and a positive (0 to 5°) back rake angle.
  • For longer production runs, diamond-tipped tools or inserts provide increased tool life.
  • Use feeds and speeds appropriate for turning aluminum.
  • Coolant is not normally required for turning unless there is a need to maximize dimensional stability.
  • Turned diameter surface finishes of 63 micro-inches (1.6 micro-meters) are typically using a visual surface finish reference guide.
  • Bushing grooves, axial and spiral types, can be generated using standard carbide-tipped broaching tools or end mills.
  • As in machining all fluorocarbon materials, the part temperature should be maintained below 572°F (300°C) to avoid the possible liberation of a fine particulate fume. See the DuPont MSDS for Vespel® CR-6100 if more detailed information is required.

Whatever your component geometry, we can work with you to design and manufacture a Vespel® CR-6100 part to fit the application.

Contact Boulden today with your application details to upgrade to Vespel® CR-6100. We have the material you need in stock and can ship immediately. 

 

Dupont Vespel machined pump components

Dupont Vespel® CR-6100 Machined Pump Components

 Parts machined from Dupont Vespel

Centrifugal Pump Components Machined From Dupont Vespel® CR-6100